Hot Sale ESE Lightning Rod EarlyHD-T5.3 Advance Discharge Lightning Rod Lightning Protection SystemESE Lightning Rod Early HD-T6.3 Advance
Discharge Lightning Rod Lightning Protection SystemHD-T6.3/0.5 advance discharge lightning rod made of special stainless steel material, needle (needle) height 500mm, ****, receiving flash capacity 200KA, with simple installation, corrosion resistance, suitable for direct lightning protection of small objects. Can also be installed with lightning rod installation bracket will be installed in a relatively high position, as a standard receiver use.
Lightning rod protection radius as shown in the figure.
Lightning rod body using threaded connection, needle rod and flange plate using on-site welding, installation and fixing according to the site will be flange plate fixed root can be, while the lead wire and flange plate connection, can be fixed in the flange plate can also be welded on the steel pipe, can also be fixed directly on the daughter wall above.
Grounding resistance requirements. 10 ohms.
Traditional lightning protection devices can be divided into direct lightning protection, induction lightning protection and integrated lightning protection. Anti-direct lightning devices are generally composed of three parts, namely, flash catcher, lead wire and grounding body; flash catcher and divided into lightning rod, lightning line, lightning belt, lightning protection network. Lightning rod as a lightning rod lightning protection principle is: lightning rod through the wire access to the ground, and the ground to form a potential difference, the use of their own height, so that the electric field strength increased to the limit value, so that the electric field of the thundercloud distortion, began to ionize and downstream pilot discharge; lightning rod in the role of strong electric field for tip discharge, the formation of upward pilot discharge; the two will form a lightning path, followed by the diarrhea into the earth, to achieve the effect of lightning protection . In fact, lightning rod is a lightning rod, you can discharge around the lightning rod in advance, the lightning flow through its own grounding conductor into the earth, to avoid the protection of objects directly subject to lightning strikes.
Lightning wire is iron, lightning rod is copper (can also be silver), the top of the lightning rod to the sky, lightning wire connected to the buried lightning network, lightning wire connected to the lightning rod, thunderstorm season, lightning from the sky into the lightning rod until the buried lightning network, is to eliminate lightning strikes, to protect the building or instrumentation facilities.
Mostly used in buildings, transformer poles, machine rooms, launch racks, etc.
Lightning cable is mainly divided into two types of round and flat cross-section. The metal cladding of the connecting layer is divided into different metals: lead-clad steel, lead-clad copper, copper-clad steel and lead-clad steel lightning rods.
Lightning rods are used on high-rise buildings, chimneys or oil tanks. The lower lead can be connected to the lightning rod. The lightning rod consists of the needle body and the structural parts of the mounting class. The needle class is made of stainless steel; the needle body must be made of copper-clad steel round bars or steel tubes as the base material.
