Hunan Heou Engineering Consulting Co., Ltd
Hunan Heou Engineering Consulting Co., Ltd
Add to Cart
ESE Lightning Rod Early HD-TESE2500 Advance Discharge Lightning Rod Lightning Protection System
Lightning rod protection range
Lightning rod protection range should be calculated in accordance with GB50057-2010 "Building Lightning Protection Design Code" Appendix IV "rolling ball method to determine the protection range of the flash catcher" method provisions. If the design requirements are not met, you can increase the lightning rod by adding a connecting rod to raise the lightning rod.
Single-pin lightning arrester, a non-inductive, low-impedance metal inner conductor lead wire, the lightning current to earth, and make the protected antenna pole or building does not occur side strike and charged. In most cases the impact of the electrostatic field cable is less than 1/10 of the impedance of the tower, avoiding the building or tower charged, flashover; limit the intensity of the incident lightning current, so that the protected equipment to reduce the harm of backlash and induced overvoltage.
