Hot Sale Stainless Steel Lightning Rod French Original ESE6000 Lightning Rod Outdoor Discharge physics
 
Discharge physics shows that conventional Franklin lightning rods require a delay time to produce upward gravitational force, and this delay time can limit the effectiveness of vertical or horizontal lightning rods.

Introduction of products

This excitation device integrated in the air terminal is designed to increase the excitation distance and thus generate the
 ascending tracer earlier(regarding to an ascending tracer naturally emitted by a simple rod.
 All of our early streamer emission systems are tested in compliance with NF C 17-102 standard,edition September 2011.

Protection systems	Standards
Early streamer emission air terminal	- France: NF C 17-102 (September 2011 edition) - Argentina: IRAM 2426 - Spain: UNE 21186 - Macedonia: MKS N.B4 810 - Portugal: NP 4426 - Romania: I-20 - Slovakia: STN 34 1391 - Serbia: JUS N.B4.810
Single rods air terminals	IEC 62 305-3
Meshed cages	IEC 62 305-3
Stretched wires	IEC 62 305-3

Specification

item	value
Place of Origin	China
Model Number	HD-6000
Material	Stainless Steel
Type	High-rise Building
Function	Lighting Protection
Application	High Building
CERTIFICATE	ISO9001:2008
Use for	High-rise Building Lightning Protection
Early discharge time	60µs

Installation Guidelines

These 3 main parts are the components of the lightning protection system.

This conductor will usually run outside the structure.Each fixing should allow an eventual conductor dilatation.Bend radius have to be inferior to 0.2 meters.Metalli-cal masses situated in the zone of separation calculated beforehand will be interconnected equipotentially to the lightning conductor.Each down conductor will be equipped at the bottom with a control junction and a 2 meter-high mechanical protective tube.

The capturing device with its supporting mast and fixings. .The down conductor composed of one or several tin-ned copper tape with section in compliance with stan-dards in force,designed to flow the lightning current of the lightning conductor to the earthing system.

The earthing system with an adapted form in com-pliance with standards in force has for aim to diffuse the lightning current to the ground.An inspection pit will be installed to do the equipotential connection with the nearest electrical earth netword of the building. Installation quality of a lightning system is an impor-tant element ofr the efficiency of a lightning protection system. For each installation and in most of cases it will be bet-ter to start with the installation of the earthing sys-tems,then as direct as possible channels of each down conductor,then finish with the lightning conductor and roof circuit installation. 

1.8m Height Early Discharge Lightning Rod , ESE Lightning Conductor Active

Lightning Grounding System

Lightning Protection Rod

Lightning Protection System

Power Surge Protection Device

Signal Surge Protection Device

Ground Enhancement Material

Lightning Repeller

Anti Corrosion Coating

Aircraft Warning Lights

Stainless Steel Lightning Rod

Earth Termination System

Decorative Lightning Rods

Lightning Protection Plug

1.8m Height Early Discharge Lightning Rod , ESE Lightning Conductor Active

ese lightning rods

ese lightning rod

lightning rod ese